ASTM A333 SA333 Pipe



Certificates

Steel Pipe Weight Calculator

Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices
New ASTM A333 Grade 7 Carbon Steel Seamless Pipe View larger

ASTM A333 Grade 7 Carbon Steel Seamless Pipe

Other Trade name: ASTM A333, ASTM A333 Low Temperature Pipe, A333 PIPE, A/SA-333 Grades 1 Gr. 3 Gr. 4 Gr. 6 , ASTM A333 Grade 6 Line

Calculate Your Pipe Weight
(It will open in new window)

Send Enquiry

More details

New

$2.00

$2.00 per Kg

Add to wishlist

More info

ASTM A333 Grade 7 Carbon Steel Seamless Pipe

ASTM A333 Grade 7 Carbon Steel Seamless Pipe ASTM A333 Low Temperature Pipe, A333 PIPE, A/SA-333 Grades 1 Gr. 3 Gr. 4 Gr. 6 , ASTM A333 Grade 6 Line Pipes manufacturers

Manufacturer & suppliers of ASTM A333 Grade 7 Carbon Steel Seamless Pipe A/SA-333 Grades 1 Gr. 3 Gr. 4 Gr. 6 Low Temperature Seamless pipe, IBR approved carbon steel pipes

MD Exports LLP Pipes is a export unit of MD Exports LLPs Pvt. Ltd. We are manufacturing & supplying ASTM A333 Grade 7 Carbon Steel Seamless Pipe, A106 Grade B Pipe, A53 Grade B Seamless Pipe, ASTM A53 Gr.B Pipes, A53 Grade B, SA53 Grade A & A106 IBR Approved Pipe since 2 decades. MD Exports LLP Pipes is the first company in the world who has come up ecommerce website where you can choose A333 pipe sizes & can order online. A333 pipe is furnished to nine different grades designated by numbers Gr.1, Gr.3,Gr. 4,Gr. 6, Gr.7, Gr.8, Gr.9, Gr.10, & Gr.11.

MD Exports LLP Pipes is come up first time an online platform where project consultants & engineers get differences & comparison between 3-4 grades of Carbon Steel Pipe such as A333 Gr. 6, A53 Grade B & A106 Grade B in a single window. Although the physical and chemical properties for Grades A and B are comparable to those for A53 pipe, and the types of testing required for both specifications are similar, the tests prescribed for A106 are more stringent and are applied to smaller lots of pipe.

You can search any size & grade in steel seamless pipe to compare pricing. Before you buy ASTM A333 Grade 7 Carbon Steel Seamless Pipe you must check our free sample, we are offering best price in Asia.

MD Exports LLP has sales Representative & Stockyard in Netherlands, Venezuela, South Africa, Indonesia, UAE & Australia, in our Netherlands stockyard we have ready stock of ASTM A333 Grade 7 Carbon Steel Seamless Pipe,ERW Steel Pipe, LSAW Steel Pipe, Seamless Steel Pipe, P22 Pipe, sa213 t11, S/A 53, API 5L Line Pipe & A 106 Grade B Pipe of world's renowned manufacturers like Tenaris / Dalmine-Italy,Vallourec-Europe, Vallourec Star-USA, Productos Tubulares-Spain, Jiangu Chengde Steel Tube-China, Tubos Reunidos-Spain, Chomutov-Czech Republic, Huta Batory-Poland, Siderca-Argentina, Mittal Steel-Czech Republic Romania, NKK / Tenaris Japan, Volzhsky Russia, Tamsa-Mexico, Productos Tubulares-Spain, Niko Tube-Ukraine, Heng Yeng-China, Lubao Steel China Suzhou Seamless-China and YYC-China etc.

You can visit our UAE Stockyard to check piping material before you buy,

UAE StockyardOur UAE stockyard address is:
F14 Street, Al Hamra Free Zone,
Al Jazeera, Ras Al Khaimah, UAE,

Whenever you want to visit our UAE or other location stockyard please contact us to set-up an appointment. From our UAE stockyard, we are catering urgent delivery requirements from Oman, Qatar, Egypt, Turkey, Kuwait, Bahrain, Saudi Arabia, Sudan, Iran & Iraq.

  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Specification

    ASTM A333 Grade 7 Standard covers seamless and welded steel pipe for low temperature service. The ASTM A333 Grade 7 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 7 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.

    ASTM A333 Grade 7 covers seamless and welded steel pipe for low temperature service. The Grade 7 alloy steel involved is similar to AISI 4032 low alloy steel.
    Seamless and Welded Steel Pipe size for Low-Temperature Service:

    • Outer Dimensions: 19.05mm – 114.3mm
    • Wall Thickness: 2.0mm – 14 mm
    • Length: max 16000mm
    Steel grade: ASTM A333 Grade 7, ASME SA333 Gr.7

    ASTM A333 Grade 7 Chemical Compositions(%)

    Compositions Data
    Carbon(max.) 0.19
    Manganese 0.9
    Phosphorus(max.) 0.025
    Sulfur(max.) 0.025
    Silicon 0.13-0.32
    Nickel 2.03-2.57
    Chromium
    Other Elements

    Mechanical properties for ASTM A333 Grade 7 Alloy Steel

    Properties Data
    Tensile strength, min, (MPa) 450Mpa
    Yield strength, min, (MPa) 240 Mpa
    Elongation, min, (%), L/T 30/16.5
    Impact requirements:
    the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.
    Referenced Documents
    • ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
    • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
    • ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
    • ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Composition

    Chemical Requirements

    Composition, %
    ElementGrade 1Grade 3Grade 6
    Carbon, max 0.30 0.19 0.30
    Manganese 0.40 – 1.06 0.31 – 0.64 0.29 – 1.06
    Phosphorous, max 0.025 0.025 0.025
    Sulfur, max 0.025 0.025 0.025
    Silicon 0.18 -0.37 0.10 min
    Nickel 3.18 – 3.82

    For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese. When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.

    Mechanical Properties:Grade 1Grade 6
    Tensile Strength, min, psi (MPa) 55,000 (380) 60,000 (415)
    Yield Strength, min, psi (MPa) 30,000 (205) 35,000 (240)

    CVN Impact (Charpy) Test:

    Minimum Impact Test Temperature

    Grade 1 -50 (F) -45 (C)

    Grade 6 -50 (F) -45 (C)



    We mainly stock the Pipes of following make :

    Sumitomo Metal - Japan
    Nippon Steel - Japan
    JFE Steel - Japan
    Kawasaki Steel - Japan
    Vallourec & Mannesmann - France
    Vallourec & Mannesmann - Germany
    Vallourec & Mannesmann - Brazil
    Salzgitter Mannesmann - Germany
    Arcelor Mittal Steel - Romania
    Arcelor Mittal Steel - Czech Republic
    Tenaris Dalmine - Spain
    Tenaris Silcotub - Romania
    Tenaris Siderca - Argentina
    Tenaris Tamsa - Mexico
    Tenaris NKK - Japan
    Volzhski - Russia
    Nizhnedneprovsky - Ukraine
    USS - USA
    Welspun - India
    Jindal Saw - India
    Indian Seamless - India
    Maharashtra Seamless - India

  • A333 useful information

    Other Comments

    Grade 6 is a low alloy steel similar to 4032 in properties. Tensile strength requirement for Grade 6 is 60 ksi minimum and notched-bar impact strength is 4 to 13 ft. lbs. depending upon section size.

    Scope

    ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.


    Material & Manufacture

    The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.


    Heat Treatment Requirements

    All seamless and welded pipe shall be treated to control their microstructure by the following methods: Normalizing per A 333/A 333M-05 section 4.2.1.1; section 4.2.1.2 or section 4.2.1.3 Quenched and Tempered per A 333/A 333M – 05 section 4.2.2.1 Double Normalized and Tempered per A 333/A 333M – 05 section 4.2.2.2


    Tensile Requirements

    The material shall conform to the requirements as proscribed:

    Grade 1 Grade 3 Grade 6
    psi MPa psi MPa psi MPa
    Tensile Strength, min 55,000 380 65,000 450 60,000 415
    Yield Strength, min 30,000 205 35,000 240 35,000 240
    Longitudinal Transverse Longitudinal Transverse Longitudinal Transverse
    Elongation in 2 in. or 50 mm, (or 4D), min, %:
    Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section 35 35 30 20 30 16.5
    When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used 28 20 22 14 22 12
    For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage 1.75 1.25 1.50 1.00 1.50 1.00
    Elongation in 2 in. or 50 mm, min, %:
    Wall Thickness Grade 1 Grade 3 Grade 6
    in. mm Longitudinal Transverse Longitudinal Transverse Longitudinal Transverse
    5/16 (0.312) 8 35 25 30 20 30 16
    9/32 (.281) 7.2 33 24 28 19 28 15
    1/4 (.250) 6.4 32 23 27 18 27 15
    7/32 (.219) 5.6 30 26 26
    3/16 (.188) 4.8 28 24 24
    5/32 (.156) 4 26 22 22
    1/8 (.125) 3.2 25 21 21
    3/32 (.094) 2.4 23 20 20
    1/16 (.063) 1.6 21 18 18

    Impact Requirements

    For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed:

    Size of Specimen, min Minimum Average Notched Bar Impact Value of Each Set of Three Specimens Minimum Notched Bar Impact Value of One Specimen Only of a Set Impact Temperature
    ft-lbf J ft-lbf J Grade Min Impact
    Test Temp
    10 by 10 13 18 10 14 F C
    10 by 7.5 10 14 8 11 1 -50 -45
    10 by 6.67 9 12 7 9 3 -150 -100
    10 by 5 7 9 5 7 6 -50 -45
    10 by 3.33 5 7 3 4
    10 by 2.5 4 5 3 4

    Mechanical Testing

    Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. Hydrostatic Test Impact Test One notched bar impact test, consisting of breaking three specimens shall be made from each heat represtented in a heat-treatment load on specimens taken from the finished pipe.


    Lengths

    Lengths required shall be specified on order. If no definite lengths required, following practice applies: Single Random — 17′ ~ 24′ lengths Double Random — 36′ ~ 44′ lengths


    Required Markings on Each Length

    (On Tags attached to each Bundle in case of Bundled Pipe) Markings will adhere to prescribed specifications in A 999/A999M and be: Rolled, Stamped, or Stenciled (Mfrs. Option) In addition, markings will include:

    Hot Finished or Cold Drawn Manufacture Name
    Specification / Grade Hydro or NDE
    Seamless or Welded
    Schedule Number
    the letters “LT” followed by the temperature at which the impact tests were made * and **
    the letters “QT” when the pipe is furnished in the quenched and tempered condition

    * except when a lower test temperature is required because of reduced specimen size, in which case, the higher impact test temperature applicable to a full size specimen would be marked ** when the size of the finished pipe is insufficient to obtain subsize impact specimens, the marking shall not include the letters “LT” followed by an indicated test temperature unless Supplementary Requirement S! is specified.


    Referenced Documents

    • ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
    • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe
    • ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
    • ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials

    Order Information

    Orders for material under this specification should include the following, as required, to describe the desired material adequately:

    Quantity Feet, centimeters, or number of lengths
    Name of material Seamless or Welded Pipe
    Grade Grade 1, Grade 3, or Grade 6
    Size NPS or Outside Diameter and Schedule Number of Average Wall Thickness
    Length Specific or Random
    End Finish
    Optional Requirements
    Heat Analysis Requirement
    Stress Relieving
    Repair by Welding
    Other Temperatures for Impact Test
    Hydrostatic Test or Nondestructive Electric Test
    Test Report Required
    Specification Designation and
    Special Requirements or Exceptions to this Specification

ASTM A333 Grade 7 Carbon Steel Seamless Pipe value added services

  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Polishing
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Beveling
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Honing & Turning
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Heatreating & Annealing
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Positive Material Identification (PMI)
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe UT Testing
  • Production Cutting
  • Pipe Threading

ASTM A333 Grade 7 Carbon Steel Seamless Pipe FAQ

  • How SA106 is different from A106?
    SA means that the ASTM standard has been approved / adopted by the BPVC
    (Boiler & Pressure Vessel Code by ASME).
    Examples:
    ASME says about ASTM A53: there are no differences.
    ASME says about ASTM A106: Identical, except for editorial differences at 8.1, 13.4, and 24.1 and deletion of ASTM caveat 1.5 (these are articles referring to the BPVC).
  • ASTM A333 Grade 7 Carbon Steel Seamless Pipe Special Testing is available?
    Special Testing is available upon request.
  • Do you stock Chinese standard ASTM A333 Grade 7 Carbon Steel Seamless Pipe?
    No
  • Do you have any agent in Saudi Arabia?
    Yes, we have our sales representative in Jeddah, Saudi Arabia

As we are supplying ASTM A333 Grade 7 Carbon Steel Seamless Pipe globally so we have our dedicated sales representatives & technical consultant engineer in Nigeria, South Africa, Australia, Italy, Iran, Iraq, Israel, Turkey, Spain, Indonesia, Saudi Arabia, Oman, Qatar, Kuwait, South Korea, Canada, Japan, Yemen, Netherlands, Singapore, Malaysia who can provide you detailed information about ASTM A333 Grade 7 Carbon Steel Seamless Pipe & comparison with other grades which will help you to choose the right steel pipe for your project at lowest price available in the market. For free consultancy or technical query you can send mail to our technical experts.

ASTM A333 Grade 7 Carbon Steel Seamless Pipe Packaging & Shipping Policy:

ASTM A333 Grade 7 Carbon Steel Seamless Pipe packed in MD Exports LLP's stockyard

ASTM A333 Grade 7 Carbon Steel Seamless Pipe packed in MD Exports LLP's stockyard

ASTM A333 Grade 7 Carbon Steel Seamless Pipe packed for shipping

ASTM A333 Grade 7 Carbon Steel Seamless Pipe packed for shipping

SEA WORTHY PACKING: Hexagonal shaper bundled with strong steel strips. Plastic caps on both of the pipes. Other types of packing can be made according to the customer's requirements

ASTM A333 Grade 7 Carbon Steel Seamless Pipe related industrial steel piping materials stock:

We also stock other steel pipe grades, please check the list of grades below:


Largest inventory of ASTM A333 Grade 7 Carbon Steel Seamless Pipe &ASTM/ ASME A333 GR 1, GR 3, GR 4, GR 6

Looking for ASTM A333 Grade 7 Carbon Steel Seamless Pipe? First time in India selling steel Pipe & ASTM A333 Grade 7 Carbon Steel Seamless Pipe online at lowest price with all shipping documents, supplying ASTM A333 Grade 7 Carbon Steel Seamless Pipe with mill certificate, all size & grades seamless pipes is in ready stock, MD Exports LLP Pipes offer flat 4% discount on ASTM A333 Grade 7 Carbon Steel Seamless Pipe

Reviews

No customer comments for the moment.

Write a review

ASTM A333 Grade 7 Carbon Steel Seamless Pipe

ASTM A333 Grade 7 Carbon Steel Seamless Pipe

Other Trade name: ASTM A333, ASTM A333 Low Temperature Pipe, A333 PIPE, A/SA-333 Grades 1 Gr. 3 Gr. 4 Gr. 6 , ASTM A333 Grade 6 Line

Calculate Your Pipe Weight
(It will open in new window)

Send Enquiry

Write a review

Summary

  • Product Name:ASTM A333 Grade 7 Carbon Steel Seamless Pipe
  • Price: $ 2.00
  • Product Width: 0.00 cm
  • Product Height: 0.00 cm
  • Product Depth: 0.00 cm
  • Product Weight: 0.00 kg
  • Description: Other Trade name: ASTM A333, ASTM A333 Low Temperature Pipe, A333 PIPE, A/SA-333 Grades 1 Gr. 3 Gr. 4 Gr. 6 , ASTM A333 Grade 6 Line Calculate Your Pipe Weight (It will open in new window)
Path: > > > ASTM A333 Grade 7 Carbon Steel Seamless Pipe

8 other products in the same category: