Categories



Associate Manufacturers

Surplus stock of Steel Pipes & Tubes:

Specialist in:

Offering best price on:

Widest inventory of:


SS,CS,Alloy Steel Pipe Prices

ASTM B729 / ASME SB729 / Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipe supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM B-729 / ASME SB-729

SPECIFICATION FOR SEAMLESS UNS N08020, UNS N08026, AND UNS N08024
NICKEL ALLOY PIPE AND TUBE

1.Scope

1.1 This specification covers UNS N08020, UNS N08026, and UNS N08024 seamless, cold-workd pipe and tube intended for general corrosive service. 

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 

1.3 The following safety hazards caveat perains only to the test methods portion, Section 10, of this specification: This standard does not purport to addres use. It is the responsibility of the user of this sandard to estoblis appropiate safety and health practices and detetmine the applicability of regulaory limitations prior to use.  




TABLE1 CHEMICAL REQURIEMENTS


Element Composition, %
UNS B08026 UNS N08020 UNS B08024
Carbon, max 0.03 0.07 0.03
Manganese, max 1.000 2.00 1.000
Phosphorus, max 0.03 0.045 0.035
Sulfur, max 0.03 0.035 0.035
Silicon, max 0.50 1.00 0.50
Nickel 33.00-37.00 32.00-38.00 35.00-40.00
Chromium 22.00-26.00 19.00-21.00 22.50-25.00
Molybdenum 5.00-6.70 2.00-3.00 3.50-5.00
Copper 2.00-4.00 3.00-4.00 0.50-1.50
columbium(Nb)+tantalum ... 8×carbon-1.00 0.15-0.35
Nitrogen 0.10-0.16 ... ...
Iron remainderA ramainderA ramainderA

 
By difference.   


TABLE2 MECHANICAL PROPERTY REQUIREMETNS

Tensile Strength, min Yield Strength,A min Elongation in 2 in.(50.8mm)or 4D min, %
ksi MPa ksi MPa
80 550 35 240 30.0



 Yield strength shall be determined by the offset method at 0.2% limiting permanent set in accordance with Test Methods E 8. 

 

Our Associate manufacturers

Steel pipe & tube ready inventory: